HM1092 HD High NIR Sensitivity Sensor for Always On Vision
1280 x 720 30FPSMAX 1/9″ MIPI
Himax Imaging HM1092 is a highly compact 1/9” 720P High Definition CMOS Image Sensor designed for low power, near infrared camera applications. The HM1092 offers the same readout modes and features as HM1091 but achieves more than two times NIR sensitivity enabling additional power savings in NIR assisted camera systems.
The HM1091 has an active array of 1280 x720 and operates up to 30 frames per second (FPS) in full resolution and 60FPS in 640 x 360 binning mode. The sensor features 2×2 binning mode, equivalent to a 2.8µ pixel, with LED synchronization timing control to simplify system integration and help minimize LED pulse duration to reduce system power consumption.
To meet the tight space requirements of next generation small form factor smart devices and embedded camera with narrow bezel display panels, the HM1092 is available in an extremely small CSP and bare die package option.
影像感測器特色
- High performance 720p HD Backside Illuminated CIS
- 30FPS in 720p HD resolution, 60FPS in 640 x 360 resolution
- Supports 33.7° CRA for compact, low profile camera module design
- Spread Spectrum Clock Generator (SSCG) on MIPI DPHY reduces EMI
- <65mW power consumption at 30FPS and 55mW at 640 x 360 using 2.8V and 1.8V
- Integrated single-pixel defect correction
- 1-lane MIPI CSI2 supports RAW8/10 data format
- Provide LED control signal to sync with rolling shutter exposure
- Simple 2-wire serial interface for register programming
- Available in CSP and Bare Die (RW) package
影像感測器參數
Active Pixel Array | 1280 x 720 |
Pixel Size / Technology | 1.4 µm x 1.4 µm / BSI |
Diagonal (Optical Format) | 2.08 mm (1/9″) |
Color Filter Array | Monochrome |
Frame Rate | 30FPS HD, 60FPS 640 x 360 |
Readout Modes | Full (HD), Sub / Bin |
S/N RatioMAX | 37dB |
Sensitivity | 670 mV / Lux-sec @ 530nm 3595 mV /(µW-sec/cm2) @850nm 2110 mV /(µW-sec/cm2) @940nm |
CRA (maximum) | 33.7º |
影像感測器規格
Supply Voltage Analog Supply Voltage Digital Supply Voltage I/O | 2.8 V 1.2V (1.8V LDO option) 1.8 / 2.8V |
Reference Clock (EXTCLK) | 6 – 27 MHz |
Serial Interface | I2C (400kHz max.) |
MIPI Data Format | 10b |
Power Consumption HD 30FPS Power Consumption SHUTDOWN | 64.57 mW 18 µW |
Package | CSP, RW |